+91 9513725725 sales@emtindia.net
Pre-Owned Equipment
Skip MenuHome Category Products-from-BGA-Repair
Product Category
Products from BGA Repair
12
RBC-1 Re-Balling & Printing Tool
Brand : MS Engineering Co Ltd
Re-Balling & Printing of almost all BGA is possible.
View Details
Make An Enquiry
.
SND-N Solder Printing Tool
Brand : MS Engineering Co Ltd
SND-N is a manual printing tool for BGA and CSP. It must be made of the metal mask, to the BGA. However,after dropping BGA into the hole of the metal mask, it fixes lightly with a package holder. and sloder paste is manually printed with a squeegee.If solder paste is inserted in the slot of SND-N for transcription and set up it to MS9000SAN-III. even transcription of solder paste is possible.
View Details
Make An Enquiry
.
PLCP Printing Jig (for lead pitch 0.5 ~ 0.8mm)
Brand : MS Engineering Co Ltd
PLCP type Printing Jig is used when soldering CSP of fine pitch. They are both CSP which re-balling and or new one. The function is included of the PLCR re-balling Jig. However, when only the jig for printing is required, the PLCP type Jig for printing was prepared.
View Details
Make An Enquiry
.
MSC-01K Solder Cleaning Kit
Brand : MS Engineering Co Ltd
First step, the flux is applied to the land. And then, special solder is added by a electric iron. The dissolution temperature of the solder on the land will be about 100 degrees C. The electrical iron that temperature controlled is recommendable when to the work. Then, the temperature of the land is since it does not become high beyond necessity. And next, suck up remains solder on the land by the solder wick with the electrical iron.
View Details
Make An Enquiry
.
RBL Re-Balling Jig(for lead pitch 0.8mm or more)
Brand : MS Engineering Co Ltd
RBL Jig is a manual re-balling jig for BGA and CSP. It must be makes the metal mask to the BGA,CSP. However, RBL jig can be using for any kinds of the metal-mask. It has to clean beforehand the package to re-balling. and then, the package must be printing of solder by SND printing Jig.
View Details
Make An Enquiry
.
PLCR Re-Balling Jig (for lead pitch 0.5 ~ 0.8mm)
Brand : MS Engineering Co Ltd
PLCR re-balling jig can be fixed of the CSP, therefore, printing and re-balling for the fine lead pitch CSP is possible. PLCR Re-balling Jig is manufactured in accordance with the specification of the CSP.
View Details
Make An Enquiry
.
12